Retired and Sold Out- A reference guide to the past replicas.

Here's a small listing of some of Master Replicas past products:

Darth Vader Lightsabers

ESB- Limited to 2,000 worldwide
ANH- Limited to 7,500 worldwide

The complex story of father and son, of darkness and light, is revealed in The Empire Strikes Back, and the full scope of the Star Wars epic takes hold. Darth Vader, fallen Jedi Knight and father of Luke Skywalker, stands against his son in an epic duel that could determine the fate of a galaxy. Overwhelmed by the dark side of the Force, Vader confronts Luke, wielding his most deadly and personal weapon: the lightsaber.

Vader’s lightsaber is an elegant balance of black and silver. The simplicity of its design contrasts the intensity of its power. In this way, it resembles the lightsaber of the young Padawan Anakin in Attack of the Clones, or the lightsaber inherited by Luke in A New Hope.

The lightsaber prop seen in The Empire Strikes Back varies slightly from the piece used by Vader in A New Hope. While both lightsabers probably began as the same antique flashgun, minor details of the prop were altered for use in this second installment of the Star Wars trilogy. Ultimately, this version of the lightsaber would also be dropped and an entirely new prop would be used for Return of The Jedi.

The rubber grips were lengthened by approximately 5/8 of an inch. The clamp lever originally present on the center control box was removed and replaced with a pin and what appears to be a hat nut or other fastening device. Small wires were also inserted into the oval recharge ports near the front of the flashgun. Finally, the control box sidebars were changed to black painted pieces with angled ends, rather than the chrome, squared-off sidebars on the original Star Wars prop.

Key Benefits

	Carefully recreated from original archival materials and fully authorized and endorsed by Lucasfilm Ltd.
	Constructed from durable machined and die-cast metal, each replica is polished and assembled by hand.
	This special lightsaber, if ordered with, comes with a custom-designed display case, a polished metal plaque and includes a Certificate of Authenticity

Jango Fett Blaster Set Limited to 1,500 worldwide

Jango Fett: renowned bounty hunter and slain father of Boba Fett. He was so capable in battle that entire army of clone soldiers were created from his DNA. However, even Jango’s legendary combat skills were not enough when he faced Jedi Master Mace Windu in the first battle of the Clone Wars, and the feared bounty hunter was struck down. Although Jango Fett carries many lethal devices in his arsenal, his primary weapon of choice is a pair of WESTAR-34 blaster pistols.

The original hero props were constructed of machined aluminum and brass barrel, body and trigger with cast resin grips. Several molded resin props were made for use in action scenes so that the intricate hero props would not become damaged during filming. A metal cover was soldered over the trigger guard of one of the hero props so the actor portraying Jango Fett, Temuera Morrison, could spin the pistol on his finger with an old western flourish before replacing it in the holster. Because of the way this action sequence is filmed the modified trigger guard isn’t visible in the movie scene.

The Master Replicas design team completed a thorough examination of the original hero props in the Lucasfilm archive. Their study included taking measurements of the props as well as matching colors and finishes of the metal components. Our designers also conducted a digital scan of the prop that they converted to a Pro-Engineer (Pro-E) file in order to recreate an exact three-dimensional model of the props. Using the 3D model as reference, our manufacturer created tooling patterns that were used to produce CNC (computer numerically controlled) machined parts for the replicas with astonishing accuracy.

We are pleased to present our Jango Fett blaster replicas with one of the most unique display cases we’ve ever designed. We hope these exceptional replicas will become a focal point in your collection.

Features:

	Set of Jango Fett’s WESTAR-34 blaster replicas as seen in Star Wars: Attack of the Clones.
	Constructed of hand polished machined aluminum, brass, and die-cast metal parts.
	Set includes one open trigger blaster and one stunt trigger blaster. The stunt trigger blaster will only be available in this set.

The Stormtrooper Blaster LE:

The Stormtroopers were unswervingly loyal to the Emperor and represented the most visible extension of Imperial might. They served both the ground-based armies of Palpatine's forces, and the space-based Imperial starfleet. Formidable in their white armor, their primary means of enforcement was the BlasTech E-11 blaster rifle.

The prop makers modified the military version of a 1950’s British submachine gun to create this blaster prop. To create this fearsome weapon, the prop-makers modified the gun by adding plastic “T-track” to cover the barrel vent holes. A metal strip was bent into shape and attached to the top of the receiver in order to attach a WWII tank azimuth scope. The original 32 round magazine for the submachine gun was shortened to hold three rounds.

While many different resin stunt Stormtrooper blasters were used during filming, Master Replicas has recreated the metal hero version based upon the blank-firing submachine gun as used in A New Hope. With its heavy, steel construction, our replica weighs almost as much as the actual prop.

Master Replicas takes great pride in presenting this most sought-after prop replica. We hope that you’ll enjoy our interpretation of this iconic weapon.

Features:

	Official reproduction of the “E-11” blaster rifles used by the Stormtroopers throughout the original Star Wars: A New Hope.
	The original prop was modeled after a 1950’s British submachine gun.
	Our replica is made of metal with ABS parts and detailing and weighs almost 30 pounds.
	Comes with a custom display case, numbered plaque, plaque stand, and certificate of authenticity.
	Approximate dimensions: 21” L x 6” W x 9” H
	Limited Edition – 3,500

Princess Leia Blaster: Signature Ed. 750 Sold Out!

Princess Leia Organa. Imperial Senator and one of the leaders of the Rebel Alliance. Although her spaceship, the Tantive IV, is overrun by Imperial forces, we see early-on that she will not be taken easily. Hiding in the darkness, Leia manages to dispatch a Stormtrooper with her trusty sidearm before she is captured. Like the princess, her personal weapon, the DDC Defender sporting blaster is slender and elegant.

While we don’t actually get to see very much of this particular blaster, its few seconds on screen have become iconic. The original filming prop used in A New Hope was composed of several unlikely components. The base weapon was a Soviet .22 caliber target pistol. This was apparently chosen for its small size so as to not appear bulky while being held by the petite Carrie Fisher.

An extended barrel was added to the base pistol, covered by a coiled cord (either the accessory cord from an antique flashgun or a British telephone cord) and a finned component (a British plastic plumbing adapter). The business end of the barrel is capped by a .22 caliber recoil compensator that was often included with this type of pistol for target shooting.

Although thought to be lost for many years, Master Replicas located the original prop in the possession of a private collector in England. To create our replica, data was obtained from this individual on the origin and dimensions of the added components. In addition, MR purchased a mint condition, period Soviet .22 caliber target pistol for reference. Upon examination of several of these Russian firearms and numerous other photographs, it was evident that many variations existed in their basic design and details. MR therefore utilized an example that appeared to be a best match to the original filming prop.

Features:

	The original prop was modeled on a Soviet .22 caliber target pistol.
	Our replica is constructed of metal with ABS parts and detailing.
	Comes with a custom display case, numbered plaque personally signed by actress Carrie Fisher (Signature Edition), plaque stand, certificate of authenticity with a photo from the autograph event (Sig. Ed.).
	Approximate dimensions: 15.5” L X 5.5” H X 1.5” W.

Mace Windu Ltd. Ed. Lightsaber-Limited to 1,750 worldwide

The Mace Windu lightsaber from Attack of the Clones is one of the most ornate lightsaber designs seen in the Star Wars saga. The lightsaber hilt is polished chrome with gold and black embellishments, and intricate patterns adorn various sections of the surface. During battle Mace's lightsaber ignites with a majestic purple glow, making it even more distinctive.

Our Mace Windu lightsaber replica was created from a direct digital scan of one of the original hero props used in the movie. We also took numerous measurements of the prop to verify the exact dimensions and referred to Lucasfilm archive photographs in order to duplicate the finish. Our replica is constructed of approximately forty parts made of machined brass and aluminum, die-cast metal, and injection molded PVC and ABS. We hope you get as much pleasure from owning this prop replica as we got from making it.

Features:

	The Mace Windu lightsaber from Attack of the Clones is one of the most ornate lightsaber designs ever seen in the Star Wars saga. The lightsaber hilt is polished chrome with gold and black embellishments and intricate patterns adorn various sections of the surface.
	Constructed from machined brass & die-cast metal this elaborate lightsaber is polished and assembled by hand.
	Comes with a custom-designed display case, display plaque, and a Certificate of Authenticity.

Luke Skywalker ROTJ FX Saber

The Famed Anakin FX Saber.....Master Replicas 1st FX.

The New Darth Vader FX:

Darth Vader EpIV FX Saber :

Celebrate the 30th Anniversary of Star Wars with a Force FX of the ultimate villain's Lightsaber from the original movie!!

Darth Vader, the Dark Lord of the Sith, was the scourge of the Jedi, a Master of the Dark Side of the Force, and one of the Emperor's most trusted servants. Originally trained by Qui-Gon Jinn and then Obi-Wan Kenobi, young Anakin Skywalker was thought to be the "chosen one" who would bring order to the galaxy, but was seduced by the Dark Side of the Force.

Now with this incredible Darth Vader EP IV Force FX Lightsaber, you can relive all of the thrills and excitement of the epic battles between the Jedi and the Dark Side.

Bring home the adventure and excitement of the Dark Sith Lord's unforgettable battle and complete the circle with this amazing replica.

· Glowing, bright red blade ignites with realistic power-up and power-down light effect of the Official Replica of Darth Vader's lightsaber from Star Wars: Episode IV A New Hope

· Durable metal hilt looks and feels like a real lightsaber.

· 3 built-in motion sensors for super sensitivity: 2 for detecting movement and 1 for detecting the impact of the blade.

· A durable metal hilt looks and feels like a real lightsaber.

· A sturdy blade is permanently attached to the hilt.

Sold Out

The Obi-Wan ROTS FX Saber:

With this shocking realization, bonds of friendship are shattered and master and apprentice face-off in a duel to decide the fate of the galaxy.

Master Replicas brings you revered Jedi master Obi-Wan Kenobi’s Force FX lightsaber. Featuring the latest advances in our FX technology, you can wield this amazing Jedi weapon in your own battles against Magna guards, General Grievous, or Darth Vader himself.

Will they have the skills to defeat you? Or will you, like Obi-Wan himself, deal a crippling blow against the dark side of the Force?

Our jaw-dropping collectible features –

-Power up/power down light and sound effects
-Idle, hum and clash sound effects taken from original sound files supplied by Skywalker Sound
-Quality metal construction
-Display stand featuring the Star Wars logo

Sold Out

The Darth Vader ESB & The Anakin ROTS

Master Replicas does it again with these Official reproductions of Anakin Skywalker’s lightsaber from Star Wars: Episode III Revenge of the Sith and Darth Vader’s lightsaber from Star Wars: Episode V The Empire Strikes Back.

-Glowing, bright red Vader blade & blue Anakin blade ignites with realistic power-up, and power-down lights effects.
-Authentic lightsaber sound effects digitally recorded from the movie.
-Features motion sensor controlled sound effects: power-up, power-down, idle, movement, and clash.
-Durable yet light chrome plated aluminum body looks and feels like a real lightsaber.
New design is closer in look and feel to the size of a real lightsaber.
-Uses Only 3 AA batteries, not included. (Another improvement!)
-Also includes the Display Stand too!

Both are now Sold Out

Mace Windu ROTS FX Saber!

These are back for a limited run.

They've been repackaged as "ROTS", but I don't see the difference from the AOTC ones that we had before. But they are brighter & louder than the original run in 04'

Sold Out

The Luke ROTJ FX Saber!

Originally a "Borders Book" Exclusive, but now available here too!!

-Official reproduction of Luke Skywalkers lightsaber from Star Wars: Episode VI: Return of the Jedi.
-Glowing, bright Green Luke blade ignites with realistic power-up, and power-down lights effects.
-Authentic lightsaber sound effects digitally recorded from the movie.
-Features motion sensor controlled sound effects: power-up, power-down, idle, movement, and clash.
-Durable yet light chrome plated aluminum body looks and feels like a real lightsaber.
New design is closer in look and feel to the size of a real lightsaber.
-Uses 6 AA batteries, not included.
-Also includes the Display Stand too!

Sold Out

Please Note: The Luke ESB & Vader ANH below are BOTH Sold Out::

The Luke ESB Saber

With sturdy blades that are permanently affixed to the finely crafted metal hilts, these collectibles are official reproductions of the Luke Skywalker lightsaber from Star Wars: The Empire Strikes Back.

The power-up and power-down light effects on these unique collectibles are more dazzling than ever. You'll also appreciate the more sensitive motion sensors and authentic lightsaber sound effects digitally recorded from the Star Wars movies.

Sold Out

Official reproduction of Darth Vader’s lightsaber from Star Wars: A New Hope
Glowing, bright red blade ignites with realistic power-up and power-down light effects
Authentic lightsaber sound effects digitally recorded from the movie
Features four motion sensor controlled sound effects: power-up, idle hum, clash, and power-down
Durable metal hilt looks and feels like a real lightsaber
Sturdy blade is permanently attached to the hilt.

**Sold Out**

Luke Skywalker Episode IV: ANH FX Saber:

Celebrate the 30th Anniversary of Star Wars, with the Luke Skywalker Episode IV Force FX Lightsaber from Master Replicas! In 1977, with the opening of A New Hope, a generation of movie-goers watched in awe as Obi-Wan Kenobi handed Luke Skywalker the lightsaber that had once belonged to the boy’s own father. In an instant, Luke ignited the blade – and for the first time, the world saw the glow, and heard the now-familiar hum of the sci-fi weapon that would go on to capture the imaginations of millions!

30 years later, Master Replicas is proud to offer the Luke Skywalker Episode IV Force FX Lightsaber – a functional replica of the first lightsaber ever seen in the Star Wars Saga!

Features:

· An enhanced glowing green blade with realistic power-up and power-down light effects. The power-up and power-down light effects are produced by a string of 64 super-bright LEDs that ignite sequentially inside the blade.

· Five motion sensor controlled sound effects digitally recorded from the movie: power-up, idle hum, swing, clash, and power-down.

· 3 built-in motion sensors for super sensitivity: 2 for detecting movement and 1 for detecting the impact of the blade.

· A durable metal hilt looks and feels like a real lightsaber.

· A sturdy blade is permanently attached to the hilt.

Sold Out

The Darth Maul Double Blade FX Saber:

Forged as a hateful weapon by his Master, Darth Sidious, the creature of evil known as Darth Maul, had but one goal: to exact revenge on the Jedi order for the decimation of the Sith a millennium ago.

Now, with the incredible Force FX Darth Maul double bladed lightsaber, YOU can relive the excitement of Maul’s dark attack on Jedi Master Qui-Gon Jinn on the hot desert sands of Tatooine, or plunge headlong into combat against two jedi warriors in the heart of the Theed Royal Palace.

Bring home the adventure and excitement of the formidable Darth Maul’s unforgettable battles to your own STAR WARS universe, today.

-Official reproduction of Darth Maul’s lightsaber from Star Wars: The Phantom Menace
-Comes as 2 separate Darth Maul FX Single Blades that connect to form the double-ended Darth Maul FX Lightsaber over 7 feet long!
-Glowing, bright red blade ignites with realistic power-up and power-down light effects.
-Authentic lightsaber sound effects digitally recorded from the movie
-Features motion sensor controlled sound effects: power-up, power-down, idle, movement and clash
-Durable yet light chrome plated aluminum body looks and feels like a real lightsaber.
-New design is closer in look and feel to the size of a real lightsaber.
-Uses 6 AAA batteries, not included.
-Also includes the Display Stand too!

Sold Out

Medal of Yavin:

As seen in Star Wars: A New Hope.
Carefully recreated from original archival materials and fully authorized and endorsed by Lucasfilm Ltd.
Constructed from solid die-cast metal plated with 18-karat gold with a rich matte finish.
Suspended from an olive-green ceremonial ribbon like the ones used for military medals of honor.
The medal is presented in a black lacquered, jewelry-style box handsomely accented with the Rebel insignia on top and displayed on a cushion of luxurious textured material inside the display box. The inner panel can be propped inside the top of the box to form a striking A-frame display.
In addition to the custom-designed display box, the replica comes with a numbered metal plaque and includes a Certificate of Authenticity.

Master Replicas Jedi Training Remote:

Get it before it gets you: As seen in Star Wars: A New Hope. Recreated from original Lucasfilm archival materials. Fully authorized and endorsed by Lucasfilm Ltd. Constructed from over 160 durable PVC and ABS injection molded components, each replica is painted and assembled by hand. Comes with a custom-designed display stand, silver-toned metal plaque, and Certificate of Authenticity. When placed on the display stand, the prop appears to levitate. Carefully recreated from original archival materials and fully authorized by Lucasfilm Ltd.
Comes with a custom-designed display case, display plaque, and a Certificate of Authenticity.

The Thermal Detonator Signature (Carie Fisher) & LE Version.

Master Replicas Thermal Detonator:

The Thermal Detonator, which first appeared in Star Wars: Return of the Jedi, is the first prop we’re offering used by a female character--Princess Leia Organa--disguised as the bounty hunter who appeared before Jabba the Hutt to negotiate a better price for the captive Chewbacca.
Constructed from die cast metal, the Thermal Detonator, measures approximately 2 ½ inches in diameter.
A compact metal sphere with solidity and substance and a weathered finish for added realism.
Complete with original sound effects digitally translated from the movie along with random flashing light patterns that emanate from the device when the trigger switch is pulled.
Carefully recreated from original archival materials and fully authorized by Lucasfilm Ltd.
Comes with a custom-designed display case, display plaque, and a Certificate of Authenticity.

Sold Out

Darth Maul Battle Damaged Saber Ltd. Ed.-Limited to 750 Worldwide

In the climactic final moments of The Phantom Menace, Darth Maul and Obi-Wan Kenobi lock blades in one of the most dramatic and memorable lightsaber duels ever seen in the Star Wars saga. During the intense battle, Obi-Wan cleaves Darth Maul’s double-bladed lightsaber in half with a ferocious upward thrust. This momentous blow does not disable the vicious Sith’s weapon nor does it dissuade him from continuing his brutal battle with the Jedi.

Features:

	The battle damaged lightsaber looks the way it might have appeared after Obi-Wan Kenobi cleaved it in half during the climactic duel scene that ended the life of Darth Maul.
	The battle damaged lightsaber is constructed from metal with a weathered finish that shows the scrapes, dents and scorch marks that could have been caused during brutal combat.
	The open, severed end exposes ruby red crystals and wiring that we imagine could be inside a “real” lightsaber.
	Comes with a plaque, plaque holder, Certificate of Authenticity, and custom crafted display case.

Obi-Wan Weathered Lightsaber Limited to 2,500 worldwide Sold Out!

General Obi-Wan “Ben” Kenobi: Jedi Knight and hero of the Rebellion. As mentor to Luke Skywalker, he assists the Rebels in destroying the Death Star and ultimately bringing an end to the evil Empire. In keeping with the realism prevalent in the Star Wars saga, this weathered version of the Obi-Wan Kenobi lightsaber shows the effect decades of use in the harsh environments of the Star Wars galaxy had on his weapon. Master Replicas has diligently replicated the details of this lightsaber, including the scratches, dents, and battle scars evident on the original filming prop seen in A New Hope.

Old Ben’s lightsaber is one of the most widely recognized weapons from the original trilogy. Its antique design harkens back to an earlier time, or as Obi-Wan puts it, “a more civilized age.” What makes this lightsaber so fascinating is that while the design appears very uniform and integrated, the film prop actually comprised several unrelated components.

The pommel (or rear of the lightsaber) was made from a European faucet handle, while the silver band in the center was taken from an antique flashgun similar to the ones used to create Luke’s lightsaber for the first two films. The two control switches on the right side of this band are actually 1970’s-era transistors. The finned grip ring in front of the band is from a World War I grenade. The rear grip and front emitter have yet to be positively identified, but they appear to be some type of gear and gas burner head respectively. The prop makers for A New Hope masterfully combined these disparate parts into one coherent design. Over the years, it has become one of the most beloved and best-remembered lightsaber designs in the Star Wars saga.

Features:

This special lightsaber reflects the decades of battles fought by Obi-Wan Kenobi and comes with a custom-designed display case, a polished metal plaque and a Certificate of Authenticity

As seen in Star Wars: Episode IV A New Hope.

Constructed from durable machined and die-cast metal, each replica is polished and assembled by hand.

Anakin Skywalker AOTC Saber - Limited Edition Sold Out

He mastered the Force like no other.
Neither Siths nor clones could diminish his courage or his unparalleled power as a warrior.
Anakin Skywalker was a true Jedi Knight... or was he?
Become the guardian of your galaxy with this finely crafted lightsaber replica, which first appeared in Star Wars: Attack of the Clones.
Officially authorized by Lucasfilm, this durable, hand-crafted collectible has the look and feel of the real thing. Now you can join the formidable legion of the Jedi Knights with the Anakin Skywalker Lightsaber Limited Edition

Features:

	Constructed from machined brass and die-cast metal, the Anakin Skywalker Lightsaber is plated with luminous chrome with black and 14k gold-plated accents.
	This collectible is carefully recreated from original archival materials and fully authorized by Lucasfilm Ltd.
	The lightsaber comes with a custom-designed display case, numbered plaque and a Certificate of Authenticity. Uphold tradition and add this testament of Jedi splendor to your collection.
	Signature Edition by Hayden Christensen.

Yoda Lightsaber: Episode III Revenge of the Sith. Sold Out

While the Clone Wars ravage the galaxy, the wise Jedi Master Yoda senses the dark side of the Force surrounding Chancellor Palpatine. When the Separatists invade the Wookiee world of Kashyyyk, Yoda leads the Republic's clone army into battle. Assisted by the mighty Wookiees Chewbacca and Tarfful, Yoda barely escapes a surprise ambush when the Clone Wars take a fateful turn.

Upon his return to Coruscant, Yoda learns the terrible truth. With the Jedi™ decimated, and the Republic reorganized into the first Galactic Empire, Yoda must face the new Emperor in the ultimate confrontation between the greatest wizards of the Force in the galaxy.

For Star Wars: Episode III Revenge of the Sith, Yoda is armed with his elegant lightsaber, which remains largely unchanged from its original appearance in Star Wars: Episode II Attack of the Clones. The small, six-inch long silver device is augmented with the same control buttons and protective shroud at the front of the emitter. While it may seem ungainly in human hands, its diminutive size is a perfect fit for the hands of the elfish Jedi Master. Since Yoda was again created digitally for Episode III, his lightsaber is also a digital construct. ILM again worked their magic to bring Yoda and his trusty weapon to life on the big screen.

Features:

	Official reproduction of Yoda’s Lightsaber from Star Wars: Episode III Revenge of the Sith.
	Machined aluminum body with clear-black overspray to simulate dark anodonic steel. Stamped aluminum emitter shroud. PVC molded grips with battle “scars.” Weathered to look battle worn. Machined center control band with a gloss black finish.
	Comes with a custom-designed display case, numbered metal display plaque, and a Certificate of Authenticity.
	Display case has a matte black base, mirrored floor, acrylic supports, and acrylic dust cover.

Emperor Palpatine Cane and Cloak Clasp LE:

The Emperor Palpatine Cane and Cloak Clasp replicas as seen in Star Wars: Return of the Jedi.
Strong and sturdy, the cane is made of shock resistant molded resin with a permanently attached rubber foot at the end of the cane to protect the tip.
The twisted, gnarled cane is a well-recognized emblem of the warped, evil Emperor Palpatine.
Set includes the cane and the clasp.
Both the cane and the clasp have a highly polished, ebony finish.
The cane comes with a numbered metal plaque, plaque holder, certificate of authenticity and on a wall plaque with a gunmetal texture and machined aluminum support posts covered in rubber coated silicon, to display the replica to its best advantage.
Both the Cane and the Clasp are directly molded from the original prop.

Limited Edition of 1500 WORLDWIDE.

Sold Out

Darth Sidious: Episode III Revenge of the Sith

Patiently plotting to take over the Republic, the evil Darth Sidious is now ready to unleash his incomparable reign of terror upon the galaxy. Slowly rising to power using political machinations and the dark side of the Force, the evil Sith Lord has orchestrated much of the interplanetary strife plaguing the Republic.

Now, when the Republic is most vulnerable, and the Jedi are most overwhelmed, Sidious finally unveils a sinister master plan a thousand years in the making. In one fell swoop, the devious Sith Lord wipes out the Jedi Order and reorganizes the crumbling Republic into the first Galactic Empire.

Lord Sidious' colossal gambit has given him absolute power as ruler of the galaxy, and to help him keep his oppressive reign, he enlists a most deadly Sith apprentice - the equally villainous Darth Vader.

To create the weapon of the vile Darth Sidious, the prop department machined an original master and cast copies of the prop in chrome and gold plated resin for ease of handling. Surface detailing consisted of two LEDs - in keeping with the prequel trilogy lightsaber look - a copper colored recharge port, and a brass emitter plate. Other areas, notably the neck rings bellow the emitter and the individually shaped end cap were gold plated and antiqued, before the saber was given a distinctive paint finish.

For the Master Replicas model, Lucasfilm supplied our engineers with a pristine copy of an original prop. It was laser scanned to enable them to exactly recreate the unique, organic form in diecast metal, with machined metal details. The trim parts are plated in genuine 18k gold and every detail from the antiqued brass emitter to the unique prismatic paint finish have been stunningly replicated.

Features:

	This officially licensed replica lightsaber exactly reproduces all of the intricate, ornate curves and unique paint finish of the deadly weapon of the evil Dark Lord of the Sith - Darth Sidious.
	Machined and die cast metal construction with Unique prismatic paint finish and antique finished 18K gold plated accents
	Comes with a custom-designed display case, numbered metal display plaque, and a Certificate of Authenticity.
	Display case has a matte black base, mirrored floor, acrylic supports, and acrylic dust cover.

SOLD OUT

Obi-Wan Lightsaber: Episode III Revenge of the Sith.

“General Kenobi, years ago you served my father in the Clone Wars…” - Leia Organa, Senator of Alderaan

In the years since the onset of the Clone Wars, Obi-Wan Kenobi has become a Jedi Master serving as a General in the ongoing war against the Separatists. After rescuing Chancellor Palpatine from the clutches of General Grievous, the dreaded commander of the droid armies, Obi-Wan tracks Grievous to the sinkhole planet of Utapau, where he must destroy him if the war is to end.

By the time Obi-Wan returns to Coruscant, the Republic has fallen, and his worst fear is realized – his former Padauan Anakin Skywalker has turned to the dark side and become Darth Vader, a Dark Lord of the Sith. Now, Obi-Wan must confront – and destroy – his former apprentice. On the volcanic lava planet of Mustafar, old friends turned fierce enemies face off in the ultimate lightsaber battle that will forever change the destiny of a galaxy…

In this climactic Star Wars movie, Obi-Wan Kenobi is armed with a new lightsaber - built when he ascended to the Jedi Council. Since this new weapon represents the one used by Obi-Wan in Star Wars: Episode IV A New Hope, the prop department referenced available archive materials and machined a similar looking hilt in aluminum, with brass and resin details.

Taking the World War 1 grenade and faucet handle details of the original they cleverly reworked them into a narrower, more streamlined design. This not only made the hilt easier to wield in the many fast and furious lightsaber fights, it allowed it to fit into the design aesthetic of the prequel trilogy while retaining the familiar profile of the original iconic prop.

To recreate the Obi-Wan Kenobi Episode III Revenge of the Sith Lightsaber, Lucasfilm provided Master Replicas with an actual filming prop for reference, enabling our engineers to exactly reproduce every detail and dimension. We hope you will proudly display this ultimate replica in your collection for many years to come.

Features:

	Official reproduction of Obi-Wan Kenobi’s lightsaber from Star Wars: Episode III Revenge of the Sith.
	Machined from aluminum and polished brass, with chrome plated, high gloss black, and copper painted accented parts.
	Comes with a custom-designed display case, numbered metal display plaque, and a Certificate of Authenticity.
	Display case has a matte black base, mirrored floor, acrylic supports, and acrylic dust cover.

SOLD OUT

More Pictures:

Luke Skywalker: Episode IV A New Hope

Sold Out

Seduced by tales of the Jedi Knight father he never knew, Luke Skywalker is recruited to the freedom fighting cause of the Rebel Alliance, armed only with his courage and a lightsaber that had once belonged to his father…

For the first time own an accurate, fully licensed replica of Luke Skywalker’s iconic Jedi weapon as seen onscreen in Star Wars: Episode IV A New Hope—complete with a customized plaque autographed by Luke Skywalker himself: actor Mark Hamill. This signature edition replica is accurate in every detail and features the correct positioning of the mid-band clamp as it was seen onscreen. Our previously released Elite Edition featured details that were seen only on the lightsaber prop used for publicity photos, in addition to being constructed from stainless steel.

Replicated from Lucasfilm archival materials and a direct study of an original antique flashgun and sourced parts used on the filming prop, each replica features:

	Machined and extruded aluminum and brass parts
	Seven co-molded injection molded grips
	Injection molded plastic detailed parts
	Museum quality display case with mirrored base and acrylic cover
	Certificate of authenticity
	Numbered plaque autographed by Mark Hamill
	Limited to only 750 pieces

Darth Vader: Episode VI Return of the Jedi

"YOU DON'T KNOW THE POWER OF THE DARK SIDE!"
Darth Vader, Return of the Jedi

Sold Out

Fated to meet again, Darth Vader and Luke Skywalker confront each other onboard the second, dreaded Death Star. Armed with the belief that each can turn the other from their chosen paths along the Force, father and son ignite their Jedi weapons in a heroic duel of destiny.

Master Replicas presents our incredible limited edition release of the last lightsaber ever wielded by the infamous Darth Vader, from Episode VI: Return of the Jedi. Recreated from the surviving prop in the Lucasfilm archives, this intricately detailed collectible features:

	Machined and die-cast metal construction
	Injection molded plastic components
	Museum quality display case with mirrored base and acrylic cover
	Prop story, numbered plaque and Certificate of Authenticity

The Signature Edition version is limited to only 500 units and features a plaque signed by Star Wars legend, David Prowse (who portrayed Darth Vader throughout the original trilogy). Fulfill your destiny and order this exclusive edition before it becomes as rare as a Sith Lord.

SE Edition SOLD OUT

Qui-Gon Jinn Lightsaber CE Episode I (Retail Exclusive)

The venerable Jedi Master Qui-Gon Jinn clashed sabers with Darth Maul in the climactic duel sequence from The Phantom Menace. Though tragically killed by the Sith Lord, Qui-Gon's fight wasn't finished -- his apprentice, Obi-Wan Kenobi, took up Qui-Gon's saber and struck down the Sith Lord, sending his body plummeting down a reactor shaft in two parts.

Jedi Master Qui-Gon Jinn's signature lightsaber is finally available, completing the set of sabers wielded by the saga's most visible players. Manufactured with the same attention to detail and quality you have come to expect from Master Replicas, the Collector's Editions are made from slightly different materials from its Limited Edition counterparts so they can be offered at a more affordable price point.

Make sure to add this stunning saber wielded by the legendary Jedi Master Qui-Gon Jinn to your collection today!

This CE version of Qui-Gon’s weapon offers the same outstanding attention to detail as its Limited Edition counterpart but features –

	Unlimited edition
	Machined aluminum sleeve
	Handsome, durable die cast metal body and details
	New style display stand
	Certificate of authenticity
	Same quality workmanship as the LE
	Same great Customer Service support as our Limited and Studio Scale Editions

SOLD OUT

Darth Vader: Episode III Revenge of the Sith

Once a Jedi Knight and a hero revered throughout the Republic, Anakin Skywalker forsakes all that he once held dear when he becomes the evil Sith apprentice Darth Vader. Lured to the dark side by promises of absolute power, the fallen hero betrays his fellow Jedi, his friends and even his beloved Padmé when he becomes the very enemy he once swore to defeat. Now, as a disciple of evil, Vader executes the Emperor’s every command and annihilates all who stand in the way of his master’s schemes.
On the volcanic world of Mustafar, Vader confronts his former mentor Obi-Wan Kenobi and is left for dead. When he arises from the fateful encounter, he find himself more machine than man, encased in the signature black armor that will come to strike fear and terror throughout the galaxy.
Of all of the lightsabers seen in the Star Wars saga, Darth Vader’s has undergone the most changes. Each time the prop has appeared in previous filmed episodes it has differed in detail with many versions, both hero and stunts being made. In Star Wars: Episode III Revenge of the Sith, the prop department has taken previous versions of Vader’s iconic weapon of ultimate evil and amalgamated them seamlessly into one.
Machined from aluminum, with accented copper and aluminum details, the lightsaber features a gloss black mid band and shroud that approximate the antique camera flash of the original classic trilogy prop. Seven hand grips, a stepped end cap, and a unique laser etched design in the control box top ensure that this version of Vader’s weapon retains a familiar profile while making it, once again, unique in its own right.

To recreate the Darth Vader Episode III Revenge of the Sith Lightsaber, Lucasfilm gave Master Replicas access to an actual filming prop to reference, enabling our engineers to exactly reproduce every detail and dimension. We hope you will proudly display this ultimate replica in your collection for many years to come.

Features:

	Official reproduction of Darth Vader’s Lightsaber from Star Wars: Revenge Of The Sith.
	Machined in chrome plated brass with copper, • Accented and die-cast metal detailed parts.
	Comes with a custom-designed display case, numbered metal display plaque, and a Certificate of Authenticity.
	Display case has a matte black base, mirrored floor, acrylic supports, and acrylic dust cover.

SOLD OUT

Anakin Lightsaber: Episode III Revenge of the Sith.

After three years on the front lines of the Clone Wars, Anakin Skywalker’s incredible feats have made him a hero throughout the Republic and earned him full Jedi Knight status. Now, as the Clone Wars reach their devastating climax, Anakin returns to Coruscant for a daring rescue that earns him an appointment to the Jedi Council but is only reluctantly accepted by his fellow Jedi.

While continuing to conceal his marriage to Padmé Amidala, Anakin worries that his nightmares of Padmé dying in childbirth may be prophetic, and the young Jedi is determined to find a way to save her.

Seduced by promises of unlimited power and the hope of stopping death, Anakin plunges down the path to the dark side that has been carefully laid before him. Betraying the Jedi and those closest to him, Anakin Skywalker transforms into the most terrifying incarnation of evil – the Sith Lord Darth Vader.

The weapon Anakin wields represents the lightsaber that will one day be handed down to his son, Luke. The prop was composed of a chrome-plated brass body and a polished aluminum center band, copying the look of the antique camera flash that formed the basis of the original classic trilogy props. From the Star Wars: Episode IV A New Hope lightsaber, they copied the placement of the flash’s “red button” but replaced the “glass eye” with a copper colored dome. The remaining details follow the Star Wars: Episode V The Empire Strikes Back version and include six hand grips, a knurled center band, and a unique laser etched design in the control box top, emulating the style of a printed circuit board. A brass activation switch and a plastic clip, for attachment to the actor’s belts, complete the design of this iconic Star Wars weapon.

To recreate the Anakin Skywalker Episode III: Revenge of the Sith Lightsaber, Lucasfilm provided Master Replicas with an actual filming prop for reference, enabling our engineers to exactly reproduce every detail and dimension. We hope you will proudly display this ultimate replica in your collection for many years to come.

Features:

	Official reproduction of Anakin’s lightsaber from Star Wars: Episode III Revenge of the Sith.
	Machined from aluminum and brass with copper painted and 18K gold plated accented parts. Co-molded rubber and injection plastic grips.
	Comes with a custom-designed display case, numbered metal display plaque, and a Certificate of Authenticity.
	Display case has a matte black base, mirrored floor, acrylic supports, and acrylic dust cover.

SOLD OUT

More Pictures:

Master Replicas Final Star Wars Limited Edition Saber:

The Luke Skywalker RoTJ V2

Prop Story:

Luke Skywalker's heroic journey to become a Jedi Master reached its climax when he confronted Darth Vader and his evil master, Emperor Palpatine, on the second Death Star. Palpatine had hopes to seduce the son of Skywalker to the dark side of the Force, believing Luke would give in to temptation, kill his father, and take his place at the twisted Emperor's side.

Facing off in an epic lightsaber duel, Darth Vader encountered a fierce opponent in his son. Fighting to protect his sister and everything he held true, Luke's ferocity surprised the Dark Lord. Filled with rage, Luke came close to embracing the dark side, almost killing his father. Due to the Jedi training he learned from Yoda, he was able to avoid the path of Anakin Skywalker. Tossing his lightsaber aside, he turned to face the wrath of the enraged Sith Emperor.

The lightsaber Luke Skywalker wields in the Return of the Jedi has a long and complicated history. The hilt worn by actor Mark Hamill, in most of the scenes in the movie where the lightsaber is not ignited, was in fact an old Obi-Wan Kenobi "stunt" lightsaber from A New Hope. The blade was cut off and it featured a longer lever on the center band, a conical knob on the rear above the pommel, and a D-ring attached the lightsaber to a belt clip. Cast in aluminum from a milled wooden master, this lightsaber features uneven heat sink fins which we have recreated in the interest of accuracy.

For the fighting scenes, a newly machined, but more simplified look-alike version of the above lightsaber was created with a removable blade. A cleaned up version of this lightsaber was used for the close-up insert shot when Darth Vader comments on Luke constructing a new lightsaber. This became known as the "hero" version of the prop because it was featured so prominently in a close-up. The "Version Two" of the prop was altered in post-production to look more like the "hero" lightsaber, possibly in interest of continuity.

Master Replicas engineers modeled this faithful replica directly from measurements taken from the surviving prop, and recreated the look from the movie with the help of extensive photographic reference materials supplied from the Lucasfilm Ltd. Archives.

- Crafted in machined and stamped aluminum and metal parts
- Museum quality display case with mirrored base and acrylic cover
- Numbered plaque and Certificate of Authenticity
- Limited to only 1500 pieces

Sold Out

Master Replicas One & Only Star Wars Expanded Universe LightSaber:

The Mara Jade SE

Prop Story:

Mara Jade was once known as the Emperor’s Hand – a highly skilled assassin and operative who can hear her master, the evil Sith Lord, Emperor Palpatine’s bidding from across the galaxy. Trained since childhood and honed into a weapon Mara learned skills in the Force to serve her dark master.

Being dismayed with Darth Vader after the epic father/son duel with Luke Skywalker on Bespin in Episode V: The Empire Strikes Back, the Emperor deployed Mara Jade on one of her last missions: assassinate Luke Skywalker. She blamed Skywalker for the feelings of conflict of good and evil within Vader.

In her first unsuccessful attempt to assassinate Skywalker, in Episode VI: Return of the Jedi, she infiltrated Jabba’s palace and posed as a dancer named Arica, knowing that he would attempt to rescue his friend, Han Solo. However, Jabba the Hutt ruined her plans by attempting to execute Skywalker and his friends himself at the Great pit of Carkoon, where lived the immense Sarlacc, a vile creature that would digest them over a thousand years.

Mara Jade finally met Luke Skywalker face to face during the events of Grand Admiral Thrawn’s campaign against the New Republic. They had to cooperate to survive the wilderness planet of Myrkr. Witnessing Skywalker’s powerful Jedi abilities, Mara developed a begrudging respect for the Jedi Master. Following the defeat of Thrawn, Luke gave Mara the gift of his first lightsaber, a weapon long thought lost but recovered by agents of the empire.

Eventually the couple realized that they were a perfect match. Despite a decade of tension, the couple ultimately fell in love and wed on Corscant. The couple represented an inspiring ideal and a powerful symbol to a galaxy in turmoil. A former Imperial agent and the galaxy’s most powerful Jed Master had found a way to overcome their differences and fall in love.

In 1999 the Star Wars Customizable Card Game (CCG) by a company called Decifer,were doing live action cards for characters for the Expanded Universe. Shannon McRandle, an actress and model, was hired to be Mara Jade. She captured the feel of the character and was so popular that she was asked to tour with Decifer on the convention circuit. At the shows, she had her lightsaber which was the one in the CCG. This lightsaber represented the one Mara had as the Emperor's hand.

The prop that was used for Mara's saber was actually an EL saber (i.e. it lit up), so there was a small toggle switch about a quarter of an inch long right in the middle of the handle. Master Replicas was able to aquire one of these lightsabers and replicated it down to the smallest detail, save one...the toggle switch. It really didn't go with the look of the saber (out of place and awkward looking) since it was placed in the middle of the black ribbed section. So to allow for it to appear as a lightsaber that would have been used and worn, the switch was left off.

Master Replicas hopes that you enjoy adding the Mara Jade’s lightsaber to your Star Wars prop collection.

Mara Jade SE

Sold Out

The Master Replicas ILM AT-AT Signature Edition Model Replica:

"The MOST Impressive Model we've ever seen!"

Bring home the legend...

It was a dark time for the Rebellion. Imperial troops had pursued the Rebel forces across the far reaches of the galaxy to the remote ice world of Hoth.

Leading the attack, was one of the Empire's most devastating assault weapons-
The fearsome All Terrain Armored Transport (or AT-AT).

Legions of film-goers watched in awe as the AT-ATs thundered towards Echo base in one of the most memorable sequences in motion picture history.

Own a piece of cinematic history...

Recreated from a direct study of the surviving miniatures in the Lucasfilm archives, this studio-scale replica is signed by renowned special effects supervisor and animator Phil Tippett. Master Replicas' AT-AT Signature Edition faithfully reproduces the details of the original filming miniatures and includes a snowscape diorama, complete with Luke Skywalker's crashed snowspeeder(cast directly from an ILM miniature).

	Faithfully reproduces the original filming miniatures as seen in The Empire Strikes Back.
	Presented on a snow-effect base with footprints and crashed snowspeeder